ARM

Samsung S5PV210 Application Processor based on 1GHz ARM Cortex-A8 core

Onboard 512MByte DDR2, 512MByte NAND Flash

4 UART, 4 USB Host, USB OTG, Ethernet, Audio, TF, RTC,...

Supports 24-bit TFT LCD and HDMI Output Display 

Supports Camera and WiFi Functions through Modules

Ready-to-Run Google Android 2.3 OS

Learn More

- TI OMAP3530 Processor based on 600MHz ARM Cortex-A8 core
- Memory supporting up to 256MByte DDR SDRAM and 256MByte NAND Flash
- UART, USB OTG, Ethernet, Audio, SD, Keyboard, Jtag,...
- Supports 24-bit TFT LCD, DVI-D and TV S-Video Output Display
- Supports VGA, Camera, WiFi, GPS, GPRS, 3G Functions through Modules
- Ready-to-Run Linux2.6 and WinCE 6.0

Learn More

TI DM3730 DaVinci Digital Media Processor based on 1GHz ARM Cortex-A8 core
Onboard 512MByte DDR SDRAM, 512MByte NAND Flash
3 UART, 4 USB Host, USB OTG, Ethernet, Audio, TF, Keyboard, Jtag,...
Supports 24-bit TFT LCD, DVI-D and S-Video Output Display
Supports VGA, Camera, WiFi, GPS, GPRS, 3G Functions through Modules
Supports for Linux2.6.32, Android 2.2 and WinCE 6.0.15

Learn More

400MHz Atmel AT91SAM9G45 ARM926EJ-STM Microcontroller
On Board 128MB DDR2 SDRAM + 128MB Nand Flash

Learn More

- CPU Core Board based on 1GHz TI DM3730 ARM Cortex-A8 Microcontroller
- On Board 256MB DDR SDRAM + 256MB Nand Flash

Learn More

Starter kit based on NXP LPC11C00 ARM® Cortex™-M0 core

Includes Co-Link programmer on-board.

Learn More

400MHz Atmel SAM9G45 ARM926EJ-STM Microcontroller
On Board 128MB DDR2 SDRAM plus 128MB Nand Flash
RS232, RS485, Ethernet, USB Host, LCD, Touch Screen, RTC …
Ready-to Run Linux 2.6.30 OS and WinCE 6.0 OS

Learn More

- 400MHz Atmel SAM9G45 ARM926EJ-S Microcontroller
- On Board 128MB DDR2 SDRAM, 256MB Nand Flash and 4MB Data Flash
- USB, Ethernet, Serial Ports, CAN, LCD, SD, Audio, Keyboard …
- Extended Precise RTC, RS485 with Isolation
- Supports Connecting to Large Size LCD through Optional LVDS Converter Board
- Ready-to Run Linux 2.6.30 OS and WinCE 6.0 OS

Learn More

- 375MHz TI AM1808 ARM926 Microprocessor
- Onboard 128MByte DDR SDRAM + 128MByte NAND Flash
- UART, USB, Ethernet, LCD/TSP, SATA, Camera, Audio, TF, JTAG,...
- Optional WiFi, Camera and 3G Modules
- Ready-to-Run Linux2.6.33 and WinCE 6.0 OS

Learn More

- TI DM3730 DaVinci Digital Media Processor based on 1GHz ARM Cortex-A8 core
- Onboard 512MByte DDR SDRAM, 512MByte NAND Flash
- UART, 4 USB Host, USB OTG, Ethernet, WiFi/BT, Audio, TF, ...
- Supports 24-bit TFT LCD, DVI-D and S-Video Output Display
- Optional VGA, Camera, GPS, GPRS, WiFi and 3G Modules
- Ready-to-Run Linux2.6.32, Android 2.2 and WinCE 6.0 OS

Learn More

- AT91SAM9G45 processor (ARM926EJ-S Core)

- 4MB DataFlash, 256MB NandFlash, 64KB EEPROM and 128MB DDR2 RAM

Learn More

- CPU Core Board based on 600MHz TI OMAP3530 ARM Cortex-A8 Microcontroller

- On Board 256MB DDR SDRAM + 256MB Nand Flash

Learn More

The LPC1114 Starter Kit produced by Embest is a brand new and low cost full-featured evaluation kit based on the NXP LPC1100 Cortex-M0 Series processor. The target board works at up to 50MHz, supports the RS485 Mode and integrates power management Unit (PMU). In addition, the board features a wide range of peripherals, including UART interface, eight channels 10bit ADC, tow 16bit timers, two 32bit timers, SSP, I2C.    The kit also integrates a smart and easy-to-use Colink2 JTAG Debugger. It is a good platform for application development and the first choice for learners.

Integrates one LPC1114 Target Board and one smart JTAG Debugger Brand new, complete functions but very low cost Features NXP LPC1114FBD48 processor, based on 32bit ARM Cortex-M0, 50MHz

Learn More

The LPC1768 evaluation board is based on ARM Cortex-M3 processor from NXP, its operating frequency is up to 100MHz, with 512KB high-speed on-Chip Flash Memory and 64KB RAM, together with a colour QVGA LCD, Ethernet, USB, CAN, SD/MMC card interface, and UARTs.

100MHz Cortex-M3, 512KB Flash,64KB SRAM 240x320 TFT LCD, 2.4" Plenty of example source code

Learn More

Cortex M3, 100 Mhz, 256KB Flash, 64KB RAM, Ethernet MAC, USB Host/ Device/OTG, x4 UARTS, CAN, SPI, SSP, I2C, I2S, ADC, DAC, TC. LCD NOKIA 6610 128x128 x12bit color TFT with Epson LCD controller, 3-axis digital accelerometer with 11 bit accuracy, temperature sensor, Ethernet 100Mbit, CAN interface and connector, USB host connector, USB device connector, USB OTG connector, joystick, micro SD/MMC card connector, UEXT Connector, Audio In/Out. Learn More

512K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC, 4x 10 bit ADC 2.44 uS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation. 128x128 pixel 12 bit color TFT LCD with backlight, Ethernet 100MBit, MMA7620 3 axis accelerometer, Two RS232 port, Two CAN drivers and connector, SD/MMC card connector, UEXT connector with I2C, SPI, RS232 and power supply, IrDA transciever, Audio In/Out, Joystick, Battery holder and connector for the RTC. Learn More

512 kB FLASH, 98kB RAM, External bus, Ethernet, USB OTG, CAN, LCD Ctrl, 72 MHz. 3.5" LCD 320x240 24bit color TFT color with backlight and touchscreen, MP3 decoder DSP + codec VS1002D, 3-axis digital accelerometer with 11 bit accuracy, 64MB SDRAM, USB host connector, USB device connector, PS2 keyboard connector, 100Mbit Ethernet, RS232 with ICSP control, SD/MMC card connector, Audio In/Out, RTC Battery holder, UEXT Connector. Learn More

256K Bytes Program Flash, 16K Bytes RAM. CS8900 Ethernet interface, USB to RS232 interface Learn More

256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, CS8900 Ethernet interface, USB to RS232 interface Learn More