NXP LPC1768 ARM Cortex-M3 Board

You can use the Cortex-M3 based LPC1768 ARM Evaluation Board to generate and test application programs for the NXP LPC17xx microcontroller family. The LPC1768 ARM Evaluation Board introduces the new NXP LPC1760 family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture, it has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. With this hands-on process, you can determine the hardware and software requirements for current and future product development.

The LPC1768 ARM Evaluation Board ships with the LPC1768 device that is a superset of several other device variants of the LPC17xx microcontroller series. The LPC1768 Board contains all the hardware components required in a single-chip LPC17xx system.

• USB 2.0 Full Speed Interface
  Standard USB connectors for USB Device, USB-OTG, USB Host and UART via USB on the LPC1768 board for applications requiring USB communications. 
• Dual Serial Ports
  Standard DB9 connectors are on the LPC1768 for both of the LPC1700's serial ports. Your application may use either of these ports. 
• Dual CAN Ports
  Standard DB9 connectors are on the LPC1768 arm evaluation board for applications requiring CAN communications. Your application may use either or both of these ports, or they may be disabled with a configuration jumper.
• LCD Display
  A detachable, 240x320 TFT, color LCD display. You may use this graphic display device to show real-time debug and program status messages. 
• MicroSD Card Connector
  A MicroSD Card connector for developing applications requiring access to MicroSD Cards.
• Joystick
  A 5-position joystick. Your application may use this to control port pin input.
• LF Amplifier
  An LF Amplifier on the LPC1768 connects the D/A output of the LPC1700 device to a speaker. You may use this LF Amplifier to generate sound. 
• Analog Voltage Control for ADC Input
  An adjustable analog voltage source is on the LPC1768 board for testing the Analog to Digital output feature of the LPC1700. A configuration jumper enables and disables this feature. 
• JTAG and Cortex/ETM Download and Debug
  The LPC1768 board incorporates both a JTAG interface and a Cortex Debug + ETM interface. When coupled with the ULINK2 USB-JTAG adapter, the Serial Wire JTAG interface allows flash programming and debugging. With the ULINKPro adapter, the Cortex Debug/ETM interface allows flash programming and instruction trace debugging.