NXP

- NXP LPC3250 Processor based on 266MHz ARM9EJ-S core
- Onboard 64MByte SDRAM + 128MByte NAND Flash + 4MByte Nor Flash
- 8 UARTs, IrDA, Ethernet, USB OTG, Audio, LCD, SD, 3 ADC, RTC, JTAG,...
- Ready-to-Run Linux2.6 OS

Learn More

Starter kit based on NXP LPC11C00 ARM® Cortex™-M0 core

Includes Co-Link programmer on-board.

Learn More

The LPC1114 Starter Kit produced by Embest is a brand new and low cost full-featured evaluation kit based on the NXP LPC1100 Cortex-M0 Series processor. The target board works at up to 50MHz, supports the RS485 Mode and integrates power management Unit (PMU). In addition, the board features a wide range of peripherals, including UART interface, eight channels 10bit ADC, tow 16bit timers, two 32bit timers, SSP, I2C.    The kit also integrates a smart and easy-to-use Colink2 JTAG Debugger. It is a good platform for application development and the first choice for learners.

Integrates one LPC1114 Target Board and one smart JTAG Debugger Brand new, complete functions but very low cost Features NXP LPC1114FBD48 processor, based on 32bit ARM Cortex-M0, 50MHz

Learn More

The LPC1768 evaluation board is based on ARM Cortex-M3 processor from NXP, its operating frequency is up to 100MHz, with 512KB high-speed on-Chip Flash Memory and 64KB RAM, together with a colour QVGA LCD, Ethernet, USB, CAN, SD/MMC card interface, and UARTs.

100MHz Cortex-M3, 512KB Flash,64KB SRAM 240x320 TFT LCD, 2.4" Plenty of example source code

Learn More

Cortex M3, 100 Mhz, 256KB Flash, 64KB RAM, Ethernet MAC, USB Host/ Device/OTG, x4 UARTS, CAN, SPI, SSP, I2C, I2S, ADC, DAC, TC. LCD NOKIA 6610 128x128 x12bit color TFT with Epson LCD controller, 3-axis digital accelerometer with 11 bit accuracy, temperature sensor, Ethernet 100Mbit, CAN interface and connector, USB host connector, USB device connector, USB OTG connector, joystick, micro SD/MMC card connector, UEXT Connector, Audio In/Out. Learn More

512K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC, 4x 10 bit ADC 2.44 uS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation. 128x128 pixel 12 bit color TFT LCD with backlight, Ethernet 100MBit, MMA7620 3 axis accelerometer, Two RS232 port, Two CAN drivers and connector, SD/MMC card connector, UEXT connector with I2C, SPI, RS232 and power supply, IrDA transciever, Audio In/Out, Joystick, Battery holder and connector for the RTC. Learn More

512 kB FLASH, 98kB RAM, External bus, Ethernet, USB OTG, CAN, LCD Ctrl, 72 MHz. 3.5" LCD 320x240 24bit color TFT color with backlight and touchscreen, MP3 decoder DSP + codec VS1002D, 3-axis digital accelerometer with 11 bit accuracy, 64MB SDRAM, USB host connector, USB device connector, PS2 keyboard connector, 100Mbit Ethernet, RS232 with ICSP control, SD/MMC card connector, Audio In/Out, RTC Battery holder, UEXT Connector. Learn More

256K Bytes Program Flash, 16K Bytes RAM. CS8900 Ethernet interface, USB to RS232 interface Learn More

256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, CS8900 Ethernet interface, USB to RS232 interface Learn More

256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, 1MB (256Kx32bit) 12 ns 71V416 SRAM, Ethernet controller with CS8900A and RJ45 connector , LCD 16x2 DISPLAY with BACKLIGHT Learn More

256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, 8MB (2 M x 32bit) 70 ns K1S321611C PSRAM, 2MB (256Kx16bit) 70ns TE28F160C3BD70 C3 INTEL FLASH, 4 CAN drivers and connectors, Ethernet controller with CS8900A and RJ45 connector, LCD 16x2 DISPLAY with BACKLIGHT. Learn More

16MB SDRAM, 128 MB NAND Flash, # Ethernet 100MBit, SD/MMC card connector, USB UART, uC Linux pre-loaded with sources and binaries on CD Learn More

256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation. 8MB (2Mx32bit) 70 ns K1S321611 SRAM, 4MB (2Mx16bit) 70ns TE28F320C3BD70 C3 INTEL FLASH, Ethernet controller with CS8900A and RJ45 connector (16bit mode with interrupt), CAN drivers and connector, SD/MMC card connector. Learn More

128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation. RS232 interface circuit with SUB-D 9 pin connector, LCD16x2 display, Dallas iButton port, Relay with 10A/250VAC contacts, Bootloader enable jumper and pullup. Learn More

512K Bytes Program Flash, 32K Bytes RAM, RTC, 8x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation. RS232 interface circuit with SUB-D 9 pin connector, LCD16x2 display, Dallas iButton port, Relay with 10A/250VAC contacts. Learn More

Cortex-M0, up to 50 Mhz, 32 kB Flash, 8kB SRAM, UART RS-485, two SSP, I2C/Fast+, 4 TIMERS/COUNETRS, CAPTURE, 10-bit ADC with input multiplexing among 8 pins. Learn More

Board with LPC1227 Cortex-M0, up to 45Mhz, 128 kB Flash, 8kB SRAM, 2 UARTs , SPI, I2C, 10 bit ADC Learn More

128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation. Extension header for uC pins, RS232 interface circuit, BSL jumper for bootloader enable/disable. Learn More

256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation. Two channel RS232 interface with two RS232 SUB-D 9 pin connectors, iButton interface circuit. Learn More